Locksmith Miami

Mag Locks and Access Control

mag locks and access control

If you are hoping to protect your entryway with something more modern than a traditional deadbolt or lock and key system, investigate different mag locks and electric lock choices. They arrive in an assortment of shapes and sizes, each for a different use case and entryway configuration. However, a significant part of determining and installing electromagnetic locks is knowing when a mag lock is suitable to use. 

Since the perception is that an electromagnetic lock is straightforward to install, it might incline users to use them regardless if they are not the best option for an entryway. In this article, our locksmith in Miami specialists will introduce you to mag lock innovation, offer some tips and some guidance for everyday use. 

Electromagnetic Lock Characteristics

electromagnetic lock characteristics

Fast-acting: The electromagnetic field which holds the armature will breakdowns when a loss of power occurs. Ensuring you disconnect the power to the electromagnetic lock when required, is what all is about. 

Durable and Simple: The electromagnet and armature are durable with no moving parts. However, electromagnets are vulnerable to the climate which may cause corrosion (which debilitates the holding force significantly) and power surges (which can cause the mag lock to short out inside or the internal coil to open). 

Needs the power to lock: Electromagnetic locks are a failsafe, which means they need the power to lock and unlocks when the loss of power occurs. The lock is appropriate for an emergency where you need to remove obstructions along the way of departure. However, less suitable for security entryways that need to remain locked when theirs a loss of power. 

You may add a battery backup to the system, that can lower the issues, yet it brings an entire set of other factors. 

How does a mag lock work?

Mag locks bring two main parts, a mounting mechanism, and some wires. The two parts get installed on the frame and the entryway so the magnetic sides are facing one another. The mounting plate can be installed when your doorframe or entryway doesn’t permit direct mounting. The wires get connected with the lock to give the electricity to power the magnet. You may run them either along or through the walls to a dedicated power supply. 

Fail-safe Mechanism

fail safe mechanism

Mag locks work on a fail-safe mechanism which means when power is provided to the lock, the magnet activates, and the two halves (one screwed onto the wall and one onto the entryway) stay stuck together, keeping the entryway locked. When the lock gets triggered, power is cut and the entryway opens. 

Fail-safe locks are perfect for emergency routes since the buildings energy will usually go out but, you must still be able to open the entryway. That is the reason many businesses install a mag lock on their front entryways. 

The most effective method to install a magnetic lock

When installing a mag lock, drill holes in the wall and the entryway to fasten the lock itself, and run wires through the wall to connect it to a permanent power source. 

Step-by-step instructions to test it

Testing the lock is a significant part of any installation procedure. Regardless if you’re a handyman, or you hired an installer from Caraballo Liberty Locksmith, you can’t consider the lock working properly until you’ve given it a test drive, and checked to ensure that it opens correctly. 

The best approach to do this is simple. You must connect the power, so you can test the locks opening capacities with whatever access system you have within reach. When the lock has power, it should hold the entryway shut tightly, and when the power gets cut, the lock should open. 

What to pay special mind to?

what to pay special mind to

There are some factors that you need to be watchful for in this kind of setup, past proper functioning. The first of these is fire compliance: Different cities and buildings have different fire codes, and it might require you to install a kind of motion sensor or contact sensor or request-to-exit button. 

Also, you may need a manual override key in your entryway. Even though a fail-safe lock means that you can exit when the power goes out, there may be a malfunction inside the lock which prevents opening at a pivotal time. On this occasion, a back-up key would be advisable. You need to counsel with your installer about this feature.

Leave a Reply

Your email address will not be published. Required fields are marked *